Home / Liên hệ / "Usb Device Not Recognized" Error "Usb Device Not Recognized" Error 02/11/2021 When you plug in your USB flash drive, a balloon warning in system tray would pop up to lớn tell you that USB Device Not Recognized. Sometimes you don’t even see this notification & your USB flash driver just stops working.No worries, it’s possible and, in some cases, quite easy to fix. Here are 3 solutions for you to try. You may not need khổng lồ try them all, just work your way down and find the one works for you. Method 1:Reinstall USB DriverMethod 2: Update USB Driver Automatically (Recommended)Method 3:Remove External DevicesMethod 4: Create INF Files Method 1:Reinstall USB DriverFaulty or outdated USB driver can render your USB devices not responding. To fix it:1) On your keyboard, press the Windows biệu tượng công ty key và R at the same time lớn invoke a Run command. Type devmgmt.msc in và press Enter.Bạn đang xem: "Usb Device Not Recognized" Error 2) ExpandUniversal Serial Bus controllers. See if you can a yellow exclamation mark in front of your Host Controller. If you cannot see such a device underUniversal Serial Bus controllers, check if you can see it under Otherdevices.3) Double-click the device with a yellow exclamation mark. Go to lớn Driver, clickUninstall.4) check the box forDelete the driver software for this device & clickOK.5) Reboot your computer with the USB flash drive connected. See if Microsoft helps you detect and install the new USB driver.If you have more than one Host Controllerswith the yellow exclamation marks in front, repeat these procedures more than once. Method 2: Update USB driver automaticallyIf Microsoft fails to find the latest version of the USB driver for you, you might need to tìm kiếm for it by yourself.If you don’t have the time, patience or computer skills khổng lồ update your drivers manually, you can bởi vì it automatically with Driver Easy.Driver Easy will automatically recognize your system & find the correct drivers for it. You don’t need khổng lồ know exactly what system your computer is running, you don’t need lớn risk downloading and installing the wrong driver, and you don’t need to worry about making a mistake when installing.You can update your drivers automatically with either the không lấy phí or the Pro version of Driver Easy. But with the Pro version it takes just 2 clicks (and you get full support and a 30-day money back guarantee):1) Download and install Driver Easy.2) Run Driver Easy và click the Scan Now button. Driver Easy will then scan your computer và detect any problem drivers.Xem thêm: 3) Click the Update button next khổng lồ the flagged USB device to automatically tải về and install the correct version of this driver (you can bởi this with the không tính phí version).Or click Update All khổng lồ automatically download and install the correct version of all the drivers that are missing or out of date on your system (this requires the Pro version – you’ll be prompted khổng lồ upgrade when you click Update All).Method 3:Remove External DevicesIf there are too many USB devices connected to your PC, some of them might not respond or work properly. To lớn fix it, you can try clean restart your PC:Remove or disconnect all unnecessary discs & devices from your computer. Make sure that the computer is off, & then remove any discs and USB devices và the memory cards from the thẻ reader slot. Disconnect non-essential devices such as camera, MP3-playersprinters, scanners, external hard drives etc., & leave mouse, keyboard và monitor connected.If you are a laptop user:1)Turn off the computer & make sure you have disabled or disconnected all unnecessary external devices. Remove the computer from any port replicator or docking station.2) Unplug the AC adapter from the computer & remove the battery from the battery compartment.3)Press & hold the Power button for about 15 seconds khổng lồ drain any residual electrical charge from the capacitors that protect the memory. 4)Insert the battery and AC adapter back into the laptop, but make sure you don’t connect any external devices just yet.5)Press Power button to lớn turn on the computer. Thenreconnect the USB devices one by one.If you are using desktop:1)Turn off the computer completely and disconnect the power cord from the back of the computer.2)Press the power nguồn button on the computer for 5 seconds.3)Reconnect the nguồn cord và turn on the power.Then reconnect the USB devices one by one.Method 4: Create INF Files1) Go khổng lồ C:Windowsinf folder.Make sure you can see these files listed: (there could be other files)usb.inf,usb2.inf,usbport.inf,usbprint.inf,usbstor.inf,usbvideo.inf 3) If some of the above files are missing, you need khổng lồ create them.If you have another computer with all the USB ports well functioned, look for the files in that computer, copy & paste them here.4) If you don’t have another computer, here is the alternative for you.Download the mentioned files from this webpagehttp://www.infdump.com/. You can find the files by searching with the name of the files.Download the files usb.inf,usb2.inf,usbport.inf,usbprint.inf,usbstor.inf,usbvideo.inf, one by one.You can save them directly lớn theC:Windowsinffolder when you are downloading or you can copy them to the C:Windowsinffolder all together after you have downloaded all of them.5) After the files are replaced or created, you need to unplug all of your USB devices và then plug them back in again. If necessary, you can also vì a reboot.Related post:What to vì chưng if USB not recognized in Windows 10?