Turn off a PS4 console.Unplug a power, HDMI and any other cables from the rear of her PS4 console.

Você está assistindo: Como tirar o cd do ps4


Place the painel on der clean, level surface in front of you. Rotate it over e rotate the painel so that ns allofit.net cedo is facing improvisado from you. Remove the cap from the screw hole straight above ns PS Logo, together shown. (Newer consoles might not have this plastic cover).

*

Insert the screwdriver into the manual eject hole e turn anti-clockwise come release a disc. This might require numerous turns of a screw. There is der layer of plástico that girlfriend will have to push with to remove ns screw. Don’t concern – this i will not ~ affect a warranty.
*

Reconnect the power, HDMI e any various other cables that were disconnected in action 1.Power on a PS4 painel to do sure every little thing is functioning properly.
Turn off ns PS4 console.Unplug the power, HDMI and any various other cables a partir de the behind of her PS4 console.
On der clean, flat, surface lugar, colocar the PS4 upside-down, and look porque o the hole straight above a PS Logo. (as shown, notice ns PS logo is upside-down).
*

Insert a screwdriver into the handmade eject hole and turn anti-clockwise to release a disc. This might require number of turns of a screw. There is a layer of plástico that girlfriend will have to push v to remove ns screw. Don’t issue – this won’t affect a warranty.
*

Reconnect a power, HDMI e any other cables the were disconnected in step 1.Power on a PS4 painel to make sure whatever is functioning properly.
Turn off the allofit.net 4 console.Unplug a power, HDMI, e any other cables from the back of your allofit.net 4 console.Place the allofit.net 4 on naquela clean, level surface in former of you, so a front the the painel is on ns left. (The allofit.net cedo on a top of ns allofit.net 4 need to be on a right-hand side).Place your palms on a top panel e let her fingers remainder on the longe side of a console.
Apply moderate, even pressure near a seam with your palms, and using your fingers as leverage, deslizamento the acima de panel longe from you. Naquela click will certainly be heard, e the dashboard will mover about 7mm. Lift the panel turn off starting a partir de the left side.
*

With the top dashboard removed, you"ll see der screw with the allofit.net signs on it. Remove this by turning ns screw anti-clockwise come remove the HDD.Pull the HDD component way out of the painel so that the disc manual eject feet (1) is clear:
Replace the top panel. Place it over the exposed section of the allofit.net 4, around 7mm longe from the seam. Now escorregadio the panel towards ns seam until it clicks into place.
Reconnect a HDMI, power, e any various other cables the were disconnected in the o primeiro dia step.Power on the allofit.net 4 to do sure everything is to work properly.
Turn off the allofit.net 4 console and disconnect it from the strength supply.Disconnect todos cables a partir de the behind of ns console.Place the painel on naquela clean, level surface in prior of you, so that the front of the console is dealing with left. Ns PS em breve on the top of the console have to be a right caminho round.Place your palms on a console’s glossy panel e let your fingers rest on the far side of the console.Apply moderate, also pressure near ns seam. Utilizing your fingers together leverage, escorregadio the glossy panel longe from you.
You will hear a click e the panel will move der couple of centimeters/inches. Lift a panel off, starting from the left side
Once the glossy panel has been removed, you will certainly see dois sets the vents ~ above the fora left lâmina of ns console. Locate the primeiro single vent (the uma not grouped com other vents.)
Slide the screwdriver into a vent and turn a screw anti-clockwise until the disc can be viewed peeking out of a disc slot. This may require several turns of the screw. Very little effort is required to turn ns screw.
Replace a glossy panel by positioning it over ns exposed ar of a console, der couple the centimeters/inches away from the seam.

Ver mais: Como Saber Com Quem A Pessoa Conversa No Messenger Do Facebook


Slide the panel towards the seam till it clicks into place.Reconnect tudo de the cables and turn on the console to inspect everything is functioning properly.